6.17		The M200-R4-XX tool is now available
			
			Communication with the machine has been optimized
			
			Reference drive has been optimized

			Bugfix -- 4-02, K3, K4, N4: Tool database
			
			

6.16	Improved the reference drive of all machines (addresses E58 error)

		The URLmon.dll file will no longer be installed together with the applications and will be deleted from the program folder upon next start

		4-00, 4-02: Improved the measuring of the tool changer

		The test/calibration specimen for 5-axis machines has been improved (required for the new Y-end switch S1/S2)
		
		Firmware 10.84 available
		
		Bugfix -- Creating new tools in the CAM tool list
		
			
		
6.15	N4: Manual tool change adjusted

		S1/S2: referencing procedure and basic position adjusted

		Separate pressure sensor can be activated in settings - machine geometry

		Bugfix -- CoCr prefabricated abutments und flow sensor monitoring

		Bugfix -- Referencing procedure K5 Impression


		
6.14
		K4 edition integrated 

		Bugfix -- 4-02: Grounding monitoring when storing tool

		
		
6.12	
		K5: Increase of the rotation angel of the B-axis

		K5: The multi job function is now available

		If there is a tool in the spindle while the manufacturing computer connects to the CNC machine,
		the machine will from now on move into default position and release the tool before referencing
		
		K3/K4: The face milling of the measuring key is now available in the "User mode" 

		Bugfix -- Blank changer initialization
		
		Bugfix -- Machine malfunction when the USB connection is interrupted
		
		Bufgix -- Use of diamond-coated tools with Zirconium oxide and Zirconium translucent
		
		Bugfix -- Updates could not be cancelled
		


6.11.32 		Firmware 10.82 available



6.11.22 		New runtime environment C++ available. It will be automatically installed during a new installation.
		When the application is updated over the internet, the runtime environment will be stored in the "SWU" folder



6.11.21 		Impression K5: Default zero point of the A-axis increased to 110 when the Impression K5 is referencing



6.11.19 		Firmware 10.80 available



6.11.16 		OEM adjustment (28)



6.11.14 		Temperature of the spindle (RP2) is now logged in "Spindellast.txt"



6.11.13 		Selected user is from now on logged in the file "MillProt.txt"



6.11.12  		Allowed deviation of the position of prefabricated abutments increased to 2.5 mm



6.11.11 		New error code -2500: error while the blank changer was rotating into a specific position

		The logging of the control unit status in the "MillProt.txt" file has been expanded:
		The state of the control unit and of the blank changer (if present) will be logged from now on



6.11.06 		The calculation of the angle errors for the N4 has been optimized
		


6.11.05 		When a job cannot be started, the application will from now on display the reason in a message window 



6.11.03 		When processing Titan, the tool will from now on be cleaned with the cooling liquid before being fetched

		OEM adjustment (34)



6.11.01 		New function "Calculate tool life automatically" available in the settings
		 
		Tool breakage monitoring during machining activated
		
		Automatic continuation of machining after a tool breakage activated

		New function "Adjust scanning threshold automatically" for prefabricated abutments available in the settings


6.10.74 Beta	New error code: -12 
		Meaning: The measured diameter of the prefabricated abutment is bigger than the diameter that is stored in the CAM data



6.10.70 	Folders in the "CNCTransfer" folder are automatically cleaned up as long as they are older than 10 minutes 
		(logged in the "CNCTransferProt.txt" file)



6.10.68 	N4: When the user activates the pump, it is automatically deactivated if the flow rate is too low
			


6.10.65 	If operation is interrupted, the spindle moves upwards so that it can speed up properly when
		operation is continued
				
		The icon for importing external CAM data is now shown also during machining (if the icon is activated in general)
				
		New parameter for job data from external CAM software: MIT=x; x passes the calculated machining time to the CNC application 



6.10.58 	N4: tool allocation for the test specimen adjusted



6.10.50 	N4: change of the flow sensor polling: if the flow rate is too low for 3 seconds, operation is interrupted;
		checking for error correction is done every 30 seconds and lasts for 3 seconds as well



6.10.45 	The "Millprot.txt" file has been extended to include the state of the reference switches when a machine malfunction occurs



6.10.42 	OEM adjustment (11)



6.10.37 	OEM adjustment (34)



6.10.36 	N4: The holder for prefabricated abutments can now be unlocked in the "machine geometry" view 
		
		The value for the zero point of the workpiece has been removed from the "machine geometry" view as it was not used

		In the "LogCNC.txt" file, data of blank changes are logged.

		Before the blank changer causes a machine malfunction, the application tries to reach the default position multiple times



6.10.28 	Firmware update function improved			
		When the firmware is updated, the log file "FirmwareProt.txt" is written



6.10.27 	OEM adjustment (11)



6.10.26 	A new firmware 10.79 is available for S1, S2, N4



6.10.25 	Bugfix -- Firmware update under specific regional settings



6.10.20 	OEM adjustment (11)



6.10.18 	Bugfix -- N4: automatic pump control

		OEM adjustment (11)



6.10.13 	OEM adjustment (11)

		Administrator mode: reproducibility of measuring key visible 



6.10.11 	N4: probing voltage deactivated (RP30=0;)



6.10.10 	Measuring function extended



6.10.09 	Drilling of tool changer inserts: extended for new materials
		
		Bugfix -- rounding error when setting the operating hours of the spindle



6.10.08 	Measuring function extended



6.10.07 	New value in the "machine geometry" view: Switching threshold measuring function 2



6.10.06 	Drilling of tool changer inserts: rotational speed decreased



6.10.05 	Bugfix -- import of external CAM data



6.10.04 	OEM adjustment (11)



6.09.25 	Adjustment of the machine control functions in the "User mode"  

		During a manual tool change the compressed air for cone cleaning is now deactivated by default
		This makes inserting tools easier

		

6.09.20 	The maximum spindle speed for N4 machines has been decreased



6.09.12 	Range for the tool length measurement increased (error -6)



6.09.02		The operating counter for the spindle now also shows the sum of wet and dry machining.



6.08.25		"Administrator mode" only: When resetting the operating counters for the spindle,
		from now on any value can be specified for each wet or dry machining

		A new firmware 10.78 for the S1, S2 and N4 is available



6.08.21		A new firmware 10.76 for the S1, S2 and N4 is available



6.08.17		The N4 and the K4 now have two separated tool databases



6.08.16 	Adjusted the allowed tolerance for the tool length (-1.5 mm to +2.5 mm)



6.08.14 	Deactivated the tool length check in the "Administrator mode"



6.08.13 	Bugfix -- Activation of the air extraction when the front cover is open

		Test specimen for the N4: increased the bar thickness



6.08.10 	Bugfix -- K4: vacuum sensor check after a tool change



6.08.06 	Bugfix -- Blank changer: fixed the "user abort" while opening the blank changer cover

		Bugfix -- Starting the job execution during a manual blank change

		Implemented the tool parameter "total length L"



6.08.03 	"Tool availabilty" view: reworked the parameter for the chucking length



6.08.02 	OEM adjustment (11)



6.07.03 Beta	Bugfix -- Starting the job execution during a manual workpiece change



6.07.01 	Spindle is turned off while waiting for CAM data (Direct Mill)

		Sister tool function revised



6.06.11 	Ground test extended



6.06.09 	Bugfix -- Tool measuring function for the N4



6.06.04 	Control unit for N4 extended



6.06.03 	OEM adjustment (11)

		BD (33)



6.05.42 	BD (32)

		Axis compensation for N4 revised



6.05.37 	OEM adjustment (11)



6.05.36 	Email function activated



6.05.33 	Bugfix air nozzle during tool change (administrator mode S-models)
		


6.05.31 	Bugfix fair trade mode



6.05.30 	Bugfix interface error in protocol (tool length and dl)



6.05.27 	Betadongle list extended

		User interface revised for cyrillic letters



6.05.23 	OEM adjustment (11)



6.05.20 	OEM adjustment (11)



6.05.19 	Tool positions N4 changed

		OEM adjustment (11)

		Bugfix calibration of the vacuum sensor

		Betadongle list extended



6.05.18 	OEM adjustment (11)



6.05.13 Beta	Fixed an issue caused by incomplete folders in the "CNC Tansfer" folder



6.05.11 	The sealing air is now turned on when activating the cleaning function



6.05.10 	Fixed an issue that occurred when changing to a sister tool



6.05.08 	Firmware update 10.74 for S and N machines added



6.05.07 	Sister tools are now fully used up



6.05.05 	OEM adjustment (11)

		If the application is updated, any user defined tool life will no longer be overwritten 

				

6.04.32 	A change to a sister tool can now only occur after a milling strategy has been completed.
		The current strategy will no longer be interrupted. 

		OEM adjustment (29)



6.04.27 	OEM adjustment (11)

		The control of air extraction has been optimised: if a tool is missing, the air extraction is turned off,
		and a dialogue displays.



6.04.25 	Status log extended (fault message S-10000 -> Tool is missing, S-2 -> Tool breakage)



6.04.24 	Changed the blank position markings for the S1/S2 

		Added more error messages in the status log



6.04.23 	Optimised the monitoring of the flow rate sensor



6.04.22 	OEM adjustment (11)

		Fixed an issue with the test specimen for the S2



6.04.21 	Adjustment for the N4

		Fixed an issue with the test specimen for the S2



6.04.20 	New warning message in case the job execution has to be stopped 3 times due to a lack of
		vacuum, air pressure or flow rate (if a flow rate sensor is installed)



6.04.15 	OEM adjustment (11)

		The tool change for the N4 has been optimised



6.04.14 	OEM adjustment (11)



6.04.08 	Symbols on the calibration/test specimen have been changed (due to the N4)

		The pump is switched off when an emergency stop occurs



6.04.07 Beta	New STL viewer replaces the old one



6.04.06 	The pump control for the N$ has been changed 



6.04.04 	Switching from wet processing to dry processing in the job details only possible with unlocked wet grinding module

		Protocol "ToolInfo.txt" is saved in the suppor folder (tool settings at the job start)



6.04.03 	Entry range for measuring values of the calibration specimen limited (to eliminate typing errors)



6.04.02 	Protocol of the compressed air sensor "Air.txt" is saved in the Job folder or setup folder

		Adjustable threshold for compressed air sensor in "Production" mode in the window machine geometry.
		Default value is 150, value range from 30 to 200






6.03.89	Higher reaction time of vacuum sensor activated





6.03.85 Axis display extended (red traffic light when reference switch is pressed)

	List of Beta dongles extended


6.03.84	Tool length measurement - Analysis and error message for invalid tool lengths (Error code -6)

	Language data bases revised

	New protocol entries for tool length and correction value (P1000X)


6.03.82	Revised machine stop when blank changer front cover is opened


6.03.81	Calibration of the vacuum sensor only with deactivated air extraction (because of extension)


6.03.80	New error analysis "Measuring key" before tool length measurement (Error code -10)


6.03.79	OEM adjustment (11)

	Bugfix: display error in the tool administration view


6.03.77	OEM adjustment (11)

	Language data bases extended


6.03.75	Vacuum sensor triggers later, if lack of vacuum leads to job cancelling

	Bugfix for firmware update S1 during transfer

	OEM adjustment (11)


6.03.74	New logfile for vacuum sensor "Vac.txt" in the corresponding job folder or application folder


6.03.73	Bugfix: moving jobs in the job list (for multijobs)


6.03.72	OEM adjustment (11)


6.03.71	Bugfix: internet update routine


6.03.69	OEM adjustment (11, test specimen, finishing activated)


6.03.68	Safety interlock is actived instantly after switching the 
user profile (administrator -> user...)


6.03.64	OEM adjustment (11)


6.03.63	OEM adjustment (11)


6.03.62	System languages deactivated except German/English


6.03.58	Standard retention of the machine geometry data increased from 15 days to 1 year


6.03.57	S1 and S2: Operating counter of the spindle divided into wet processing/dry processing
	
	Wet grinding module has to be unlocked once for the control unit


6.3.54	Administrator mode is reset to user mode after 2nd start of the software.
	Can be deactivated in the settings.


6.3.53	Current of blank changer gripper adjusted

	Changed how the the serial number is read from the control unit (because of wrong serial number with S1, S2)


6.3.52	OEM adjustment (11)


6.3.47	OEM adjustment (2)


6.3.45	Warning dialogue when in trade fair mode.
	Job is repeated until user cancels the job


6.3.44	OEM adjustment (11)


6.3.41	OEM adjustment (11)


6.3.40	Bugfix when resetting the spindle operating counter

	Manual import of external NC data extended (entry NBA=1 activates wet processing)


6.3.37	OEM adjustment (10)


6.3.36	Language data bases changed


6.3.33 	OEM adjustment (34, auto update)